|
Networked System Installations
View our Product Selection Chart.
Aeroqual manufacture a range of gas sensor transmitters
that can be used in a Networked System Installation .
Each sensor head has its own identification (ID), which allows
a “Daisy-Chained” network to be created utilising either a computer
system or PLC – see below.
The Aeroqual sensors are able to measure concentrations
of Ozone, Volatile Organic Compounds (VOC), Ammonia and Carbon
Monoxide as well as temperature and humidity . In addition
a range of other commercial sensors can be built into a network
depending upon the needs of specific installations.
Networked systems can be created using any combination of the
Series 900 range of products ( Series 900, 905, 930, 935,
940 and 945 – each designed for a specific application )
Networks of up to 256 individual monitors/transmitters can be
created.
Software for each installation is specifically written to
meet the client's output and control requirements.
We pride ourselves with the speed and efficiency with which these
networked solutions can be created in a very cost effective way.
Our technical experts are skilled at interpreting customer requirements
and creating workable solutions. Do not hesitate to request assistance
for your unique application.
Monitors Networked to a computer
system
PC data logging software supplied
Centralised control from
the PC or decentralised control from individual monitors
Specialised
application specific software is available on request
Interfacing
with the computer is done using an RS485 to RS232 converter
via a serial port.
|
 |
Monitors
Networked to the Aeroqual R1000 Programmable Logic Controller
(PLC)
PLC data logging software supplied
Centralised control from the PLC or decentralised
control from individual monitors
Specialised application specific software is
available on request |
 |
We pride ourselves with the speed and efficiency
with which these networked solutions can be created in a
very cost effective way. Our technical experts are skilled
at interpreting customer requirements and creating workable
solutions. Do not hesitate to request assistance for your
unique application. |
R1000 PLC Options
|
|
 |
Input/Output Modules
| Code |
Description |
|
| R1001 |
Extension Module
|
|
| R1002 |
I/O Module - 6 Analog Outputs
|
IO-A14-AO2 |
| R1003 |
I/O Module - 16 Relay Outputs
|
IO-RO16 |
| R1004 |
I/O Module - 16 Relay Outputs
|
IO-RO6X |
| R1005 |
I/O Module - 8 Relay Outputs
|
IO-RO8 |
| R1006 |
I/O Module - 16 Digital Inputs
|
IO-DI16 |
| R1007 |
I/O Module - 8 Digital Inputs, 4 Relay Outputs
|
IO-DI8-RO4 |
| R1008 |
I/O Module - 8 Digital Inputs, 8 Transistor Outputs |
IO-DI8-TO8 |
| |
|
|
| * for information on additional modules,
contact technical@aeroqual.com |
| |
|
|
|
|
