The Moxa G3111 Modem is a compact quad-band GPRS IP gateway which allows easy connection of your AQM 65, AQS 1 or Dust Monitor to a cellular network. The modem is preconfigured to work alongside the embedded PC installed in the instrument and is set up with a virtual server to allow direct connection to Aeroqual Connect. If required, a DynDNS can also be created for direct connection to Aeroqual Connect on a public dynamic IP address.
The modem is configured for event logging and service forwarding, allowing remote troubleshooting and data interrogation via Aeroqual Connect. It can also be easily reset and cellular reports via SMS can be provided.
Each AQM 65, AQS 1 and Dust Monitor is pre configured with an external antenna for an improved remote connection to the modem. The GuaranLink function on the modem is also enabled to ensure zero data loss and on-demand cellular communication. The IP gateway will provide a 3-tier cellular connection health check to help ensure the device always stays connected.
The modem is simple to use. All the major configuration and set up requirements are carried out by Aeroqual. The only on site requirement is for a local SIM card to be installed into the modem and a few simple configuration steps to be performed.