Series 200 – Portable Ozone Monitor

Series 200 – Portable Ozone Monitor

The Series 200 Portable Ozone Monitor is a cost-effective, ultra-portable device providing accurate measurements of ozone in air. Compatible with swappable sensor heads measuring up to 30 different pollutants (sensor heads available separately.) Suitable for use on a range of projects, including verification of fixed ozone monitor measurements, spot checking ozone concentrations, and health and safety monitoring.

Large display gives real-time concentrations or min., max., and average readings

Compatible with four ranges of ozone sensor (from 0-30ppm)

Long-life lithium battery – over 8 hours of battery life and a recharge time of 2 hours

Product overview

The Series 200 Portable Ozone Monitor is an entry-level portable monitor that provides accurate measurement of ozone in air using the unique sensor head format. Sensors are housed within an interchangeable cartridge (“head”) that attaches to the monitor base. Because the calibration data is stored in the sensor head, the process of swapping sensor heads is extremely quick and can be done by anyone, anywhere.

Users can also carry out a zero baseline adjustment which ensures more accurate measurements in between calibrations. The display can be configured to show the real-time gas concentrations or to display the minimum, maximum and average readings. Ozone concentrations can be displayed in either ppm or mg/m3.

What can it measure?

The Series 200 Ozone Monitor is compatible with four ranges of ozone sensor (measuring ozone in air between 0-30ppm), as well as a temperature and humidity sensor, if required.

This product includes:

  • Monitor base

  • LCD digital display

  • Lithium battery and charger

Key benefits of Aeroqual products

Key benefits of Aeroqual products
Industry-leading sensor technology

As sensor manufacturers, we know sensors inside and out and have unparalleled expertise in optimizing performance in real-world conditions.

Key benefits of Aeroqual products
Powerful software platform

Leveraging deep integration with our monitoring systems, we deliver software functionality unmatched by off the shelf data acquisition systems.

Key benefits of Aeroqual products
Value-adding services

Using proprietary system diagnostics, we enable proactive maintenance with hassle-free services that virtually eliminate system downtime.

Who is it for?

Employers, health and safety managers, and air quality professionals use the Series 200 Portable Ozone Monitor to ensure workers are not at risk from overexposure to ozone in air.

Practical applications for the Series 200 Portable Ozone Monitor include:

  • Verification of fixed ozone monitor measurements

  • Spot checking ozone concentrations

  • Health and safety monitoring

  • Indoor air quality monitoring

Working with your sector

Construction

Construction

Reduce risk and enhance your reputation by investing in a real-time construction site dust monitoring system.

Read more
Industrial Ozone

Industrial Ozone

Protect people and the bottom line with a real-time ozone monitoring system.

Read more
Industrial Hygiene

Industrial Hygiene

Maximize the health and productivity of your workforce with a real-time industrial hygiene air monitoring system from Aeroqual.

Read more
Communities

Communities

Protect your environment and influence positive change through community air quality monitoring projects.

Read more

Related products

Case studies

Real-Time Monitoring Protects Communities During Reclamation Project on Nation’s Largest Municipal Utility

Case Study - Remediation

Real-Time Monitoring Protects Communities During Reclamation Project on Nation’s Largest Municipal Utility

Read More
Building a Reliable Air Monitoring Solution in Challenging Environmental Conditions in Iraq

Case Study - Industrial Hygiene

Building a Reliable Air Monitoring Solution in Challenging Environmental Conditions in Iraq

Read More
Real-Time Air Monitoring Protects New Yorkers, Saves Time and Money During Expansion of Nation’s Busiest Commuter Rail Line

Case Study - Remediation

Real-Time Air Monitoring Protects New Yorkers, Saves Time and Money During Expansion of Nation’s Busiest Commuter Rail Line

Read More
OUR CUSTOMERS

Optional accessories

FAQs

There are many different types of outdoor air pollution. Measuring them all would be too expensive, so regulators focus on a smaller group of common air pollutants, sometimes known as the criteria pollutants. The criteria pollutants are:

  • Nitrogen dioxide (NO2)

  • Sulfur dioxide (SO2)

  • Carbon monoxide (CO)

  • Ozone (O3)

  • Particulate matter (PM)

As always requirements should be confirmed with your local regulatory body.

Sensors are housed within an interchangeable ‘sensor head’ that attaches to the monitor base. You can choose from up to 28 different gas and particulate sensor heads. Each sensor head contains a single gas or particle sensor. Swapping sensor heads takes seconds and no configuration or re-calibration is required.

You can find our specifications for our sensor heads here:

Aeroqual-Portable-Fixed-Sensor-Specifications.pdf

Note: Accuracy may drift as the sensor ages.

Aeroqual recommends replacement after two years, however higher exposure levels or harsh environments can lead to a significant reduction in life expectancy. Your monitor display is likely to indicate Sensor Failure or Sensor Ageing if the sensor is nearing the end of its useful life.

Note: Sensor heads may degrade even when unused and in storage.

How many sensors can I use on the monitor at once?

You can only connect one gas or particulate sensor head at a time to monitor. However, you are able to connect the optional temperature and humidity sensor at the same time as a gas or particulate sensor head.

Can I use the PM sensor head with any portable monitor?

The PM sensor is compatible with Series 200/300/500 monitors with software version 6.4 introduced in November 2014.

What is the PPM to mg/m³ conversion factor?

PPM is an absolute measurement, whilst mg/m3 varies depending upon pressure and temperature. The portable monitor measures in PPM and applies a conversion factor if you wish to measure in mg/m3.

NH3 - 0.76, CO - 1.25, CO2 - 1.96, CL2 - 3.16, CH2O - 1.34, H2 - 0.082, CH4 - 0.72, H2S - 1.52, NO2 - 2.05, NMHC - 2.5, O3 - 2.14, C2CL4 - 6.78, SO2 - 2.86, VOC - 2.5, PM - N/A*

*as particulate matter varies in size, unlike a gas molecule, PPM is not a valid unit of measurement

Do I return the instrument for calibration?

Only the sensor head needs to be calibrated. The base unit does not need to be calibrated. All parameters are stored on the sensor head.

The sensor head calibration should be completed after the first year. Aeroqual does not recommend a second factory calibration, but rather replacement after two years of operation.

See a range of frequently asked questions on calibration here.

How long can I log data for (Series 500 only)?

The Series 500 handheld unit can store a limited number of data points (8188), meaning that the length of time that data can be logged depends upon the frequency and number of data points recorded. For example:

  • If you are logging every minute for one gas (i.e. one data point per minute) you can log for 8188 minutes.

  • If you are logging every minute for one gas, temperature and humidity (i.e. 3 data points per minute) you can log for 2729 minutes.

Decrease the logging frequency for the ability to log over a longer timeframe.

Note: Once capacity is reached new data will begin to overwrite the oldest logged data.

What communication options does the portable monitor have?

S200: None

S300: 0-5V Analog output (current reading only)

S500: 0-5V Analog output (current reading only), RS232 (current, logged data and instrument control) to PC software via USB adapter. RS232 protocol available upon request for third party software integration.

What is the “Control” function (Series 300 & 500 only)?

This is designed to control generation of a gas such as ozone from an ozone generator. The control pin can be wired to control a gas concentration between upper and lower concentration limits. The upper and lower limits can be set by the user via this control function.

Refer to the relevant section of the user guide for wiring instructions.

What accessories are available for the portable monitors?

Aeroqual offers a range of accessories to suit your application. See the range here.

Air monitoring made easy

Take the time and hassle out of your next project with a real-time air quality monitoring solution.

Talk to us about your project